Close

Reducers and Adaptors

CVA250-50-100 2.5 Inch to 1.5 Reducer (BLACK)
CVA250-50-100 2.5 Inch to 1.5 Reducer (BLACK)

For use with CamVac 2.5" outlet machines, this converts to 1.5" outlet.

CVA250-50-101 2.5 Inch Universal Dust Port
CVA250-50-101 2.5 Inch Universal Dust Port
CVA400-50-114 4 - 2.5 Inch Reducer For Ducting Accessories
CVA400-50-114 4 - 2.5 Inch Reducer For Ducting Accessories

For use with CamVac 4" outlet machines, this adaptor converts to an outlet size to suit 2" ducting pipe connection.

DX100R32 100-32mm Reducer for HPLV Dust Extractors
DX100R32 100-32mm Reducer for HPLV Dust Extractors

100 to 32 mm reducer, for use with bench machines or power tools.

DX100R57 100-57mm Reducer for HPLV Dust Extractors
DX100R57 100-57mm Reducer for HPLV Dust Extractors

100 to 57 mm reducer, for use with bench machines or power tools.

DX1500B 100-32mm Reducer 2m 32mm Hose for HPLV Extractors
DX1500B 100-32mm Reducer 2m 32mm Hose for HPLV Extractors

100 to 32 mm reducer with 2 metres of 32 mm diameter hose, for use with bench machines or power tools.

SBS250-DEP10 100-61mm Reducer for HPLV Extractors
SBS250-DEP10 100-61mm Reducer for HPLV Extractors

61 to 100mm adaptor to allow the full range of Record Power extractors to be used with the BS250 Bandsaw, RPMS-R Router Table and any machines with a dust extraction port outside diameter of 61mm.

WVHS3 115 - 34 mm Heat Shrink Adaptor
WVHS3 115 - 34 mm Heat Shrink Adaptor

115 - 34mm heat shrink adaptor, ideal for non-standard extraction ports.

DX50R32 50-32mm Reducer to Suit BBS1 & BBS2 Bobbin Sander
DX50R32 50-32mm Reducer to Suit BBS1 & BBS2 Bobbin Sander

50 - 32 mmreducer for BBS1 and BBS2 Bobbin Sanders.

DX1500C Stepped Power Tool Adaptor for 32mm Hose
DX1500C Stepped Power Tool Adaptor for 32mm Hose

 

This adaptor is stepped, allowing it to be easily cut down to fit a wide range of power tools and bench top machines.

CVA100-50-101 Universal Adaptor
CVA100-50-101 Universal Adaptor

For the joining of hoses of differing sizes, featuring diameters of 1, 2, 2 1/2, 3, 4, 5 and 6 inches.

CVA100-50-102 Flexible Connector 20-60
CVA100-50-102 Flexible Connector 20-60

This extremely flexible dual-purpose adaptor can be used either as a stepped power tool adaptor or to create a bespoke dust extraction port.

If the dust producing machine has no extraction port, this adaptor can be attached using the four screw holes in the flange, allowing a suitable hose to be connected to it.

The adaptor can also be used to connect directly to a 2.5" diameter extraction system and the stepped profile be adjusted to suit the port of the power tool.